PG221OH Series Specifications

LF Back gauge.webp

Dial Size:           2.5". 63mm

Case:                  304 Stainless Steel.

Connection:      Brass, 304 or 316 Stainless Steel, 

                           1/4" NPT,  1/4" BSP, center back                                           connection.

Bourdon Tube: Brass, 304 or 316 Stainless Steel as                                       specified.

Lens:                  Polycarbonate.

Bezel:                 304 Stainless Steel, crimped on.

Filling:               Glycerin standard, Silicone available.

Accuracy:           +/-2.5%

Ranges:              All standard ranges from 30" Hg to                                     10,000 psi.

Units:                 Available in psi, kPa, mPa, BAR, kg/cm2                             in single or dual scales as required.

Custom Logo:   Available upon request.

IP Rating:          IP65

PG221VAE Series Specifications

Safety Case Gauge.webp

Dial Size:            2.5". 63mm

Case:                   304 Stainless Steel, solid front, blow-                                  out back.

Connection:       316 Stainless Steel, 1/4" NPT, 1/2" NPT,                                1/4" BSP, 1/2" BSP bottom connection.

Bourdon Tube:  316 Stainless Steel as specified.

Lens:                   Safety Glass.

Bezel:                  304 Stainless Steel, bayonet.

Accuracy:            +/-2%-1.6%-2%

Ranges:               All standard ranges from 30" Hg to                                      10,000 psi.

Units:                  Available in psi, kPa, mPa, BAR, kg/cm2                              in single or dual scales as required.

Custom Logo:    Available upon request.

IP Rating:           IP65